Clavadora/grapadora neumática 3 en 1 de calibre 16 y 18 de 2"

Excellent little staple gun for the price. We used it to staple fencing to fence posts. Easy to load and easy to use.

I do a lot of home improvements. So buying a nail gun was a no brainer, but thought maybe this one may be a cheap throw away. Until I used it. It definitely drives the nails in. I had to adjust the air where it was driving them so deep. It's a good quality built gun. Well worth the money. To the point I bought multiple nails guns from this maker

Seems to work well! No problems firing everything I've put in it so far. Love that it does multiple sizes.

Ran about 100 nails through it this morning. No issues. Lightweight and easy to handle.. Just set your compressor regulator to the gun at 90 psi and let it rip.

It works well. As noted in some other comments, the nailer can leave an indentation on the wood when you are driving nails. Nothing quick paint cannot hide

This is perfect for remodeling.

Used it all day today, no problems at all, very smooth

Some of the nails did not go all the way creating issue for me but after I figure it the issue it worked fine.

Used this gun for building shelves and other products. Like that I can use 16 ga, 18 ga, or staples. Haven’t tried staples yet. I have had no jamming problems. Seems to be good quality.

Travail très bien et accepte les deux grosseurs de clous mais par contre il est limite a 1 1/4'' de long.Je dois le retourner

Purchased gun and when I received it box looked damaged but after opening box it was obvious that it was used. I returned it and just went back to holding a nail and using a hammer. Maybe I will try again to order. I did like the look of gun and it was sturdy with some weight so seemed like a nice tool.

Works great delivered quickly.

I bought this nailer to install my Hardie trim (fiber cement) with 2 inch 16 gauge nails. It left the nails sticking up an inch.I borrowed a friend’s pneumatic nailer and it worked fine with my air compressor, so this nailer just isn’t as strong. (The few nails in the photo that are fully sunk are from the other nailer.)It works great for sinking into wood though!

Jams and misfires quite often. You get what you pay for. Better get a more reputable and reliable brand.

I'm a single dad on a tight budget...started some renovations and needed a 16 gauge finish nailer so I picked up one of these from local big box hardware store as they are much cheaper than stand alone 16 gauge nailers. While I'll say it definitely works for the 16 gauge nails for 2 inch nails even at maxed out recommended psi it'll leave the nails a bit proud from what I've seen even after adjusting the nail depth gauge as well. No biggie with a nail sitter.I haven't used the brad nail or stapler section yet.

Easy to use and load.

Nice Price, good quality, works good and not heavy

So far it’s very good, performed as advertised, but haven’t used it much. So for so good

The power of the 16-gauge isn't strong enough for all the nails to actually go through and you have to hit it a few times with a hammer.

The item came as described. Very light weight but substantial at the same time. After first use the nails were not sinking very low but after a slight air pressure adjustment, this nail gun is solid.

nice little gun , has no problem shooting 1.5" staples . Wish i do the other one that has the continuous fire feature, but it was twice the money

ELLE FAIT UN BON TRAVAIL

Shot many staples today and it worked great. I rarely shoot brads for molding etc. s having one gun for all is very nice as I tools in three houses and appreciate the lower cost and flexibility of this gun. I have three electric staplers of higher cost that all failed in 1 day of use. This nematic stapler s the answer. My wife does crafts and loves this gun too.

This is the 2nd nailer I have purchased. Same model. The first on broke after the warranty ran out. The 2nd broke a week after the return window closed. Same problem the drive piston jammed.Changed Rate.Contacted seller and sent pictures They will send s replacement.

It's absolutely beautiful gun, hope it works well as it it looks, solid build feels bit heavy in the hand for it's size but I actually like it, size of it like regular 18 gauge gun,I am loving it so far,if it works well I won't be leaving anymore comments,if it fails then I will let you guys know.

Need oil , filter, and pressure gauge IN the line from compresser to use. Doesn't work on dry air!!

Sinks 18 gauge 2 inch brad nail with ease. Depth is also easy to adjust if they stick out any. Very, very happy with the price and quality.

Satisfactory/Adequate...prompt delivery. Thank you.

Bought for husband to use while he remodels our kitchen he us very satisfied with quality

Works perfectly with nails of both sizes. Easy to set up. Using a 6 gallon compressor, I can easily drive a stick of nails at a slow pace; at a faster pace, you'll have to wait for air pressure once or twice. Great value. I'll be buying a framing nailer from the same brand.

It's so handy to have one gun for 16 & 18 gauge nails as well as staples. I've used it for all three and it works great.