Clavadora neumática de suelo de doble mango de 1-3/4" y calibre 18

I installed 540 Square Feet of hardwood bamboo flooring with this nailer and it never malfunctioned once! I was concerned that I had to spend around $400 to get a good nailer, but this proved me wrong! It performs very well and works with nails that I purchased at a local hardware store. My only criticism is that it is difficult get the foot adjusted properly for the floor thickness and it makes it touchy to line the nailer up on the tongue of each board. Watch this carefully, or you might end up with a nail in the wrong place!

Works well. In the beginning it was splitting the plank about half the time, but after switching the nails it almost never did. The two handles are handy, when switching from kneeling to standing position. One thing to be wary - when plugging the air hose, one nail sticks out and it has to be removed by hand.

I have laid about 1500 SF of Brazilian Pecan with this nailer. I was a bit skeptical when I purchased it, but I read the reviews and decided to give it a try. It works amazing right out if the box. There are 2 things that are a little annoying though. 1. The grips slide out of place and are very hard to slide back into place, not a huge issue. 2. The chamber for nails only holds one strip at a time, it has to be VERY low to get a second strip to load, so it causes a lot of checking to get the new strip of nails to load. For the money, this nailer is an absolute steal.

Just banged out 1500 SF of 9/16 engineered with it. It's not the $500 tool you buy if you do it every day, but it handled this job easily. I would say it's in between Harbor Freight and high end pro tools. If you have a one off job, it's fine. For what I spent I'm very happy.

Installed 1500sq ft of bamboo flooring only jammed once(which was my fault). Oiled it every morning and worked great the whole time.

Completed over 1600 sq feet with no major problems. Jammed a few times but unjamming it only a few steps. Money well spent

Over 1500+ cleats fired without one problem on over 300 sq. ft. of 3/4" engineered oak. Like the double handle option (tall or short handle). Great value compared to other more expensive makes, and a great option for the non-pro who will only use for a few rooms.

My husband and I decided to install new hardwood floor throughout the entire house so I've had a good month of using this nailer and it worked great. No issues at all. Easy to use and I was surprised to find that other nailers were at least $100 more.

Very good product. At more than fair price.I definitely recommend it to professionals and homeowners doing their own project.

Very easy to use, light weight and perfectly nailed in my beautiful bamboo wood flooring!! Great value

Perfect performance on a strand woven bamboo floor

So far this thing has been solid. I am using it to install 9/16 thick oak engineered hardwood. The tool feels to be made of good quality. I had one jam, but it was my fault as my compressor dipped in pressure.I have been operating the gun at 50psi on the tool line.ONE SUGGESTION: I found that installing a swivel adaptor allows you to get the nail gun closer to the wall, so you can shoot an additional row or two, where you might have had to hand nail. The standard straight air line attachment can obstruct the device from getting in close when you couple with a line.

1000’s of nails and only one jam (likely my fault) but super easy to clear. Make sure you line up where the drive is vs the front foot (not difficult to do). Overall very easy to use and I was very happy with the purchase.

This is a really good nailer. I installed 1,000sq ft of fossilized bamboo that was T&G nail down. I really like this nailer, easy to use and reliable. With any nailer, need to setup your air pressure to the nails and flooring you are using. I did have three planks during the entire job where I thought the nailer was lined up and it drove a nail straight into the plank and not the tongue; my fault, not the nailer. Just be aware that can happen! Overall recommend.

I can not recommend this nailer enough for bamboo flooring. It worked great for me.

Worked great did my whole house in hardwood. Never skipped a beat.

This tool is alsome and did the job as described