Pneumatic 18-Gauge 1-1/4" Narrow Crown Stapler

Putting up chicken wire and this does the job.

This tool is lightweight and easy To handle. It throws the nails in nicely without any issues. I've been using it to nail wire mesh on a shed in preparation of stuccoing the exterior. It's a great tool for the money!

my great-granddaughter's gnome home. I stapled homemade half log siding on two sides of the two story little house with half log siding made from small shrub shoots growing in a ditch

Just what I needed

I found the stapler light and well balanced, I'm left handed so some tools do not feel "good", however, this is a breeze to use. I am happy with the results I have had so far, tacking larger components in place is quick and easy and the anti-mar pad is good. Leaves no marks or scratches on the finish. Would highly recommend this for DIY projects. Its a good product for the price.

Do not be misslead by description does not come with 1000 fasteners. Does not come with any be prepared to order fasteners at the same time

Super easy to load and single shot trigger. Even has a simple system to raise/lower staple depth.

Staples did not go in far enough and had to be hammered down

i am a bee keeper, I build hundreds of frames with this stapler. it is easy to use and light weigh. My hand doesn't get tried. i recommended this unit. Thank you. Enver

Good value. We've fun over 20,000 1/4" staples through it so far applying mesh to the side of a building. Make sure you don't buy staples larger than 1 1/4" in length. They won't fit.

Perfect. I used it to staple hardware cloth onto a chicken coop. It "nailed it"!

Très satisfait, je recommande cette agrafeuse

Easy to use, lightweight.Just through my first 5000 staples installing 1/4" underlay and working magnificently.

For the price it's a great tool..I put it to the test..meets my standards..

I was looking for a stapler to put together some RTA cabinets. Unfortunately, this model is not suitable for this work. The tip is just too large and wide to get into corners. Otherwise, the tool was priced right and worked fine on flat surfaces.

Gets plenty of use so far and is holding up well, very quiet when driving staples accomodates sizes required, sturdy, comes with oil.

This product works great! No jams, no grief, just drives staples as fast as you can pull the trigger. Once you get the depth set, it works perfectly. Used it for stapling subfloor plywood sheets. Excellent value for the money.

Bought as refurbished but jams about every 5th staple.

I bought this staple gun and was initially a bit apprehensive, but after using it I am very pleased. I installed subfloor using about 3000, 1 inch crown staples. The gun worked flawlessly. Never had 1 jam. It is hard to get every staple to the proper depth because of wood hardness differences as well as air pressure, so I had to center punch a few down lower but that was not an issue and expected. Did put 3 drops of oil in the gun for each cartridge of staples. For a DYI homeowner I am overall very pleased with this staple gun for the price I paid for it.

Worked perfect.

Works very well.Thanks.

I got a unboxed and began to use it with no problems. I changed staples both larger and smaller and it didn’t have any issues. Now I’m using this stapler 5 to 6 hours a day. GREAT PRODUCT. I would purchase it again and again.

I didn't see me using this item too often. So I was not inclined to spend a fortune on one. This thing worked great for laying subfloor. I shot about 2000 staples through it with no misfires. I do get about 1 in 50 that will not penetrate far enough but a hammer takes care those quickly. Make sure you keep the hammer close so you can wack it down right away instead of hunting for them later. Can't complain for the price!

Easy to use, light, fast stapler. Fast delivery.

Great price, gun worked well, light weight easy to handle

This was a good buy. It's very easy to use and works flawlessly.

This product works awesome, well over 5000 staples shot on first use no problems what so ever, a month later well over 50000 staples put through and still working amazing, not one jam so far, highly recommend this stapler.

Entregado a buen tiempo y calidad

Since I couldnt get a Rigid one here in Canada I took a shot at trying this one. Must say, iut worked great and is pet together well. Very happy with it.

Nice unit works well.

While this is not an expensive name brand it works very good. I had a Hitachi model that I was not impressed with. It had a plastic magazine and jammed all the time.

Nice stapler. Have run a few hundred staples of various sizes through it without a hitch. Buy a good brand of staple to use with it for best results.