Pneumatic 1.4 mm Tip HVLP Gravity Feed Spray Gun

Incredible value. Anything I with will sound like I was paid to review this but I bought it on my own dime expecting a sprayer that would do the job, no more. Might be the best gun I have ever used. This thing is fantastic and costs no more than a couple rattle cans. Running it on my little 4 gallon compressor spraying primer on steel my compressor barely sweats. I've used big brand guns and this will hold up, you might get 5% better for 20x the price

Although it is cheap, it works well for small pieces.

It's a good little gun for rims and small jobs. Jobs smaller than a car

the plastic washer around the inner part of the spray nozzle on mine was not put in right its a white washer so it was crimped out of place and my trigger squeaks after spraying a truck it does put out a decent pattern i wish i would have recieved a good one i assume it would spray better

Worth the money.

fast shipping

I used this spray gun once and now it leaks air. After troubleshooting found the oring in the handle was already worn. Flipped the oring/rubber washer that sealed the air leak. Only used this once as stated above should not wear out a rubber washer. Only had this unit for about 4-5 months. I have contacted the company hoping they sell or supply the small parts.

Comes with a nice regulator. Works well

Seems to work for my application

This gun works really well for the price, just make sure you read up on using a spray gun before using! You will want a inline regulator.

Great gun for the price

It took a while to finally get to this as the project I needed it for was coming together. The spray pattern is great. So far, the needle and cap do what you bought them to do with all the various settings you can apply. I played with air pressures from 15 all the way up due to the work I needed it to perform. There is a point of no return on each end of the spectrum just like any paint gun which will vary according to what you are asking it to do and the media you are using through it. Don't leave the gun in the cleaner solvent (synthetic enamel reducer) long as the finish will lift as mine did after just a few hours. I let mine soak between colors in the booth. Won't do that again. Also wash and immediately let the plastic cup dry, as it will deform and make sure the cap is just a little more tight than usual or it leaks during use. Hey, this isn't a $900 Iwata like my others, so it is what it is. Other than this it functioned quite well for my paint project which required multi layers of colors with pearls and fogging to get down right.

I bought this mostly for spraying air-cure Cerakote. Works great, and I'm getting great results with it.

I needed a great spray paint gun that was a great value to do small painting jobs, found this paint gun and was not disappointed, used it to paint my interior window trim, best paint to do what I needed, good price..

this paint gun works great for small repairs on boats

Shipping was fine. But right out if the box, I could see that the finish around one side by the air cap is chipping away. It works perfect and everything else about it seems perfect. Maybe the finish just isn't so great. But that don't matter to me. Sprayed a coarse silver metallic base coat good.

its very handy tool to do small paint jobs.

I have been using this gun to spray Cerakote for a few months now. It's done a great job! One quarter the price of the gun thru Cerakote and easy to clean! Super impressed

Great gun for small projects. The regulator leaks air is the only issue.

LOVE this paint gun - used to get the similar one at a local small hardware store, yet could not get a the parts, which do wear out - notably the "tip spacer." Going to get a few more to avoid cleaning every time I change colors or when I spray water based over BIN/alcohol-based primer. Sprays chalk paint beautifully!!!

I was skeptical when my husband bought this but it's a great spray gun. We have use it for spraying the archery equipment we make and it's SUPER. Easy to set up and smooth applying of finish. If you can't spray good with this gun you need to hang it up and not spray anything at all.

Good gun for value but the air gage sucks it was loose and didn't work. But if you remove the gage it sprays nice

After one or two uses started leaking air around the needle. It’s been properly cleaned and cared for after each use.

For the money you can't beat these sprayers by Numax. The three controls make it easy even for beginners highly recommended.

Quality paint jobs, ( or for me it's polyurethane) this small hvlp sprayer gives a great finish, I have used many spay guns, and this one is worth well beyond the few dollars I paid for it.

It is very good in price performance ratio. I found fan control is very sensitive and difficult to adjust.

I sprayed cerakote with this sprayer and it performed perfectly.. Well built and alot better quality than the cheaper brands 0.8mm tip sprayers sold on Amazon. This is the one to buy!

Nice inexpensive touch up gun for small projects. Worked great right out of the box.

Worked ok for spraying some clear coat but left a lot of orange peel. Maybe after testing it on some other stuff you could dial it in to get a better finish but what do you expect from a Chinese spray gun.

I use this for spraying Minwax Polycrilic on furniture.It works flawlessly. The people complaining about things not coming apart for them must just have to try a bit harder? Everything comes apart easily for cleaning, and I am very happy with my purchase.

Great spray gun for the price. Lots of different adjustments available.

Great spray gun for what I use it for. I use it for activator for hydro dipping.