Pneumatic Mini Palm Nailer

Perfecta y rapida, para lugares de dificil acceso o areas restringidas para el martilla

Nice Palm nailer works as intended great for joist clip hang our nails.. or hurricane bracing

Works great

Very simple to use, instructions are good, and works great.

Smaller nail heads got stuck to the side of the impact piece, inside the shaft of the nailer.Would probably work great on latlrger nails... just not finish nails. Not that you should be using this for any finish work. It will put dents in the wood.

Works well. Not as strong as the other one I have but it gets the job done and make driving nails in tight places much easier. I would recommend it for the price and performance.

This is going to work perfect when we are building the a living area. Will save both of our arms from all the hammering.

I’m usually pretty critical when it comes to tools.This one works better than I expected and saved me from some really frustrating problems.Magnetic nail holder and a lot of power in a very compact design.Price was really good too.

This tool is phenomenal! I got the job done much more quickly than using a hammer. I’d never used one before and I wish I would have bought one decades ago. I have a relatively small air compressor (2 gal.) and was concerned it wouldn’t recover quickly enough, but no problem. Highly recommend this.

When you don't have the room to swing a hammer this is the answer! Drives a nail with ease! Very easy to use!

If you are using this the way it's intended as a nail driver it works quite well. As a nail remover not so much. They get wedged between hole walls and pneumatic hammer. If you get it just right it pounds those sucker's right out. Very frustrating when it doesn't.

This is a great tool

This product was less than half the cost of my Bosch and I'm very impressed with the quality I don't foresee any issues if you oil it and keep debris out of the airline. I did put a swivel airline fitting on it made it even better in tight spots it's like $8 upgrade my partner bought one the day after using mine on a job. It was more efficient to buy one of these new than try to repair a blown out Bosch. Time is money

This is truely a palm nailer as it really fits into your palm. It is smaller then other palm nailers that I have used. It packs a lot of power and gets the job done. I used this to put in 1 1/2" joist hanger nails with no problem. The only issue I saw was the magnet did not always hold the nail at the back of the nailer. It would stick out a bit and I would need to push the nail back down to the back.

Specs say good for 2"-4" nails. I thought why not try this palm nailer on 1-1/2" galvanized joist hanger nails? It worked fine...I'm very happy it made the job of nailing Simpson Strong Ties Stair Stringer Connectors easy. I was on my knees, bent over on my hands, reaching around with my right palm and nailing upside down underneath the stringers to fasten these three brackets...each one used about 21 nails. Simply insert nail into magnetic barrel and find the hike with the nail, press palm into nailer, up against the bracket and wood and rappppp! Done! Easy peasy...every builder or DIYer should own one. Totally worth the $38 it cost me.

This little device is powerful, drives 3" spikes into PT with little effort. It's a little noisy, but that's expected with an impact style driving device. It fits into all those little tight spaces a normal framing gun just can't get into. I had to double up some floor joists on my deck to support composite decking, the existing joists were 16" OC, kinda hard to fit a normal framing gun between those. The handheld device made my life so much easier and faster.

Small compact tool. Delivers excellent hammers strikes quickly.

Works well & reasonably priced

Works as advertised! Excellent tool!

I got this to nail stuff between studs and other tight places. You load the nail in the end and it hammers while you hold it

I took her for a test drive...wow. like a hot knife through butter this thing drives nails into wood. Wow!

Great tool for the money love it!

Nice in tight spaces.

This works wonderfully. You have to get the "feel" for it by using for a bit. The magnet is not too strong so it doesn't hold the galv nail too strongly.. hold this in your palm rather loosely for best results. If you press hard against the nail it won't oscillate as well, and won't drive aggressively. I set compressor to about 95 psi.. held gently in palm it works like a champ!

Great product for the money well worth it! We're definitely by again

Started building a base for a 20' shed. This thing saved my arm. Well worth the money!!!!

The manufacturer is going to replace the one I have as it is dangerous in that the magnet will not hold the nail which means you have to hold it making it quite risky. Hopefully the replacement will not have the same issues. The tool works well otherwise.

For the DYI guy gal this is probably great. Not for the pro that is doing this every day. You will need to wear gloves as their is a lot of feedback with this nailer. I used it to set tico as well as 10D nails for joist hanger. You need to keep you air pressure at 100psi for it to drive correctly

Easy to use, let it do the work for you don't push to hard and it pretty quick,consistent,Great value for your buck.

Used for tight spaces in between joists to install hangers. Way better than using a hammer.

First time using palm nailer, so can not compare with other more expensive ones. In my project, the nailer just does what I expect it to do, easy to use, function well. sometime it will bend nail, not sure if it is the nailer's issue or the way I happen to use it. Overall feel it well worth the money.

I purchased this so I could use it to remove nails from palettes. Unfortunately there is a large enough gap between the pin and the tube that the tip of the nail slides into this gap. This makes it really hard to consistently push nails out of boards.